Impulse changeover switch Flush mount Eltako ES61-UC 1 maker 230 V 4 A 2000 W 1 pc(s)
Impulse switch UC. 1 normally open contact potential-free 10A/250V AC, incandescent lamps 2000W. No standby loss. For panel mounting. 45mm long, 45mm wide, 18mm deep. The latest hybrid technology combines the advantages of wear-free electronic control with the high power of special relays. Either universal control voltage 8..230V UC at control input +A1/-A2 or 230V with up to 5mA glow lamp current at the control input with glow lamp symbol (L)/-A2(N). The simultaneous use of two potentials at the control inputs is not permitted. Very low switching noise. No constant power supply required, therefore no standby loss. By using a bistable relay, there is no coil power loss and no heating thereby even when the relay is switched on. The relay contact can be open or closed during commissioning an...
Eltako4010312107966
Price: £51.99 from Conrad Electronic
| Stockist | Price | |
|---|---|---|
| £51.99 | Visit Store |
Related Products
Impulse changeover switch Surface/flush mount Eltako ESR61NP 1 maker 230 V DC, 230 V AC 10 A 2000 W 1 pc(s)
For flush and surface mounting Low switching noise, no standby power consumption, zero-voltage switching Control with 230 V, additional control input 8 - 230 V/UC. Supply and switching voltage 230 V. Time setting of the fall-back delay up to 120 minutes....
Impulse changeover switch Flush mount Eltako ESR61SSR-230V 1 maker 230 V 2 A 400 W 1 pc(s)
Noiseless Solid-State-Relay not potential-free, 400 Watt, off-delay with switch-off warning and continuous light zuschaltbar. Standby loss of only 0.3 watts. For panel mounting. 45mm long, 45mm wide, 18mm deep. Supply, switching and control voltage...
Impulse changeover switch DIN rail Eltako ES12DX-UC 1 maker 230 V DC, 230 V AC 16 A 2000 W 1 pc(s)
For DIN rail mounting Low switching noise, no standby power consumption. Control with 8 - 230 V/UC or 230 V with max. 5 mA glow lamp current.