Piko H0 56122 Hobby Locomotive decoder incl. cable, incl. connector
The Pico Locomotive decoder 56122 is a small, powerful multiprotocol decoder. It can be used in DCC and Motorola ** digital systems and also travels in analogue mode with DC voltage or with AC voltage and change of direction by over-voltage pulse (Maerklin*) system. The decoder works at a frequency of 18.75 KHz and is therefore suitable for both direct-current and bell-armature motors (e.g. Faulhaber, Maxon, Escap) up to a constant current of 1 A. Short-term higher inrush currents are well tolerated. The setting of the motor characteristic is done via the minimum, average and maximum speed. The load control can be adjusted individually to the various lokmotoren by control parameters. The decoder has two direction-dependent lighting outputs. Via the function keys F3 and f4 can use a reverse...
Piko H04015615561224
Price: £36.99 from Conrad Electronic
| Stockist | Price | |
|---|---|---|
| £36.99 | Visit Store |
Related Products
55292 H0 Piko A Connector kit
The special feature of PIKO A track geometry is that it only needs a few track pieces, and model railway enthusiasts do not need to add filler pieces at points or crossovers, where they can cause bumpy running. For the straights, the 470 mm long module...
55290 H0 Piko A Track connector
The special feature of PIKO A track geometry is that it only needs a few track pieces, and model railway enthusiasts do not need to add filler pieces at points or crossovers, where they can cause bumpy running. For the straights, the 470 mm long module...
55293 H0 Piko A Track connector
The special feature of PIKO A track geometry is that it only needs a few track pieces, and model railway enthusiasts do not need to add filler pieces at points or crossovers, where they can cause bumpy running. For the straights, the 470 mm long module...