Order by: Relevance, Product Rating
Price: Low to High, High to Low
Impulse changeover switch DIN rail Eltako EGS12Z2-UC 4 makers 230 V 2 A 500 W 1 pc(s)
UC actuator Surge group switch for central control for two 230V motors. Stand-by loss only 0.05 - 0.9 watt. The control voltage at terminals A3 to A8 must have the same potential. This surge group switch changes the commands of the sensor relays or of...
Impulse changeover switch DIN rail Eltako EGS12Z-UC 2 makers 230 V 2 A 1 pc(s)
UC actuator Surge group switch for central control for 1 motor or for motor relays. Standby loss only 0.05 to 0.4 watts. This surge group switch changes the commands of the sensor relays or of switches and buttons and switches a motor, motor isolating...
Impulse changeover switch DIN rail Eltako ES12-110 1 maker, 1 breaker 230 V DC, 230 V AC 16 A 2000 W 1 pc(s)
For DIN rail mounting Low switching noise, no standby power consumption. Control with 8 - 230 V/UC or 230 V with max. 5 mA glow lamp current.
Impulse changeover switch DIN rail Eltako ES12-200 2 makers 230 V DC, 230 V AC 16 A 2000 W 1 pc(s)
For DIN rail mounting Low switching noise, no standby power consumption. Control with 8 - 230 V/UC or 230 V with max. 5 mA glow lamp current. Switching power max. 20 A/230 V via both the contacts.
Impulse changeover switch DIN rail Eltako ES12DX-UC 1 maker 230 V DC, 230 V AC 16 A 2000 W 1 pc(s)
For DIN rail mounting Low switching noise, no standby power consumption. Control with 8 - 230 V/UC or 230 V with max. 5 mA glow lamp current.
Impulse changeover switch DIN rail Eltako ES12Z-110 1 maker, 1 breaker 230 V DC, 230 V AC 16 A 2000 W 1 pc(s)
For DIN rail mounting Low switching noise, no power consumption in standby. Control with 8 - 230 V/UC, additional control inputs for central on and central off with 8 - 230 V/UC (galvanically separated). Glow lamp current max. 50 mA starting from 100...
Impulse changeover switch DIN rail Eltako ES12Z-200 2 makers 230 V DC, 230 V AC 16 A 2000 W 1 pc(s)
For DIN rail mounting Low switching noise, no standby power consumption. Control with 8 - 230 V/UC, additional control inputs for central on and central off with 8 - 230 V/UC (galvanically separated). Glow lamp current max. 50 mA starting from 100 V-control...
Impulse changeover switch DIN rail Eltako ESR12NP 1 maker 230 V DC, 230 V AC 16 A 2000 W 1 pc(s)
For DIN rail mounting Low switching noise, zero-voltage switching. Control with 230 V, additional control input 8 - 230 V/UC (galvanically separated). Time setting of the fall-back delay of 2 - 120 minutes. Glow lamp current max. 150 mA. Switched-off...
Impulse changeover switch DIN rail Eltako ESR12Z-4DX-UC 4 makers 230 V 8 A 2000 W 1 pc(s)
4-way surge current relay, also for central and group control. With 4 independant contacts. Standby loss only 0.03 to 0.4 watts. To do this, simply connect the N conductor to the clamp (N) and the external conductors to 1(L), 3(L) or 5(L). This results...
Impulse changeover switch DIN rail Eltako ESW12DX-UC 1 maker 230 V AC, 8 V AC 16 A 2300 W 1 pc(s)
1 N/O contact potential-free 16A/250V AC with tungsten feed-contact, 230V-LED lamps up to 600W, incandescent lamps 3300W. Max. Inrush current 500A/2ms. No standby loss. DIN-EN 60715 TH35 DIN rail mounting device. 1 division unit = 18 mm wide, 58 mm deep....
Impulse changeover switch DIN rail Eltako S09-12V 1 maker 230 V 8 A 1 pc(s)
Impulse switch with manual actuation and switch position indicator. Only 1/2 division unit. Control power requirement 5W. For pulse control. Contact distance: 3mm.This text is machine translated.
Impulse changeover switch DIN rail Eltako S09-230V 1 maker 230 V 8 A 1 pc(s)
Impulse switch with manual actuation and switch position indicator. Only 1/2 division unit. Control power requirement 5W. For pulse control. Contact distance: 3mm.This text is machine translated.
Impulse changeover switch DIN rail Eltako S12-100-12V 1 maker 12 V 10 A 2300 W 1 pc(s)
Electromechanical impulse switch with manual actuation and switch position indicator. Duty cycle 100% Control power requirement 5-6W. Contact distance: 3mm. Distance between control connections/contact greater than 6mm. Suitable for connection to a SELV...
Impulse changeover switch DIN rail Eltako S12-100-12V DC 1 maker 12 V 10 A 2300 W 1 pc(s)
Electromechanical impulse switch with manual actuation and switch position indicator. Duty cycle 100% Control power requirement 5-6W. Contact distance: 3mm. Distance between control connections/contact greater than 6mm.This text is machine translated.
Impulse changeover switch DIN rail Eltako S12-100-230V 1 maker 230 V 10 A 2300 W 1 pc(s)
Electromechanical impulse switch with manual actuation and switch position indicator. Duty cycle 100% Control power requirement 5-6W. Contact distance: 3mm. Distance between control connections/contact greater than 6mm.This text is machine translated.