Order by: Relevance, Product Rating
Price: Low to High, High to Low
KOPOS LV 11X10_P2 Cable duct Wiring duct (L x W x H) 2000 x 11 x 10 mm 1 pc(s) White
Suitable for wall or ceiling mounting; Installation possible in areas with hazards caused by flammable gases and vapors (danger zone 2); Installation possible in areas with hazards caused by dust explosion (danger zone 22); ; This text is machine translated.
KOPOS MDFZ 80_KB Mounting plate (Ø x L) 73 mm x 80 mm 1 Set
Factory colour: Light grey; Max. fire resistance: 850 °C; Product size (length): 80 mm; Product size (Ø): 73 mm
KOPOS MDFZ 80/VDZ_KB Mounting plate (Ø x H) 73 mm x 80 mm 1 Set
Factory colour: Light grey; Max. fire resistance: 850 °C; Product size (height): 80 mm; Product size (Ø): 73 mm
KOPOS MDZ 300_KB Dry lining box (L x W) 119 mm x 119 mm 1 pc(s)
Suitable for installation of devices in insulated facades with a thickness of 50 - 300 mm. This prevents the formation of thermal bridges.This text is machine translated.
KOPOS MDZ KB Insulated device mount (W x H x D) 119 x 119 x 204 mm 1 pc(s)
For the installation of electrical equipment (outdoor lights, motion sensors, sockets 400V, etc.) in heat-insulated façades, with a thickness of 50 - 200 mm. Prevents the formation of thermal bridges. Load up to 40 N at a distance 180 mm from the wall....
KOPOS MDZ XL 300_KB Dry lining box (L x W) 238 mm x 238 mm 1 pc(s)
Suitable for installation of devices in insulated facades with a thickness of 50 - 300 mm. This prevents the formation of thermal bridges.This text is machine translated.
KOPOS MDZ XL KB Insulated device mount (W x H x D) 238 x 238 x 200 mm 1 pc(s)
Developed for lines with a voltage up to 400 V. For the installation of electrical equipment (outdoor lighting, motion detector emits, sockets 400V, etc.). At heat-insulated facade with a thickness of 50-200 mm. Load up to 40 N at a distance 180 mm from...
KOPOS NSM 6X10_GMT Round-head screw 100 pc(s)
The screw with NSM 6X10 locknut is used to connect the cable channels, the cable channels with the accessories and to secure the channels to the support structure. It ensures a conductive connection up to 25 A. During mounting, the screw head is located...
KOPOS P 60_S2 Divider 1 pc(s)
The separation pad is used to separate the interior of the cable channels, to insert and arrange the cables. It also enables the separation of individual lines for fuseElectrical compatibility The cover should also be used to form a closed, shielded room...
KOPOS PEKE 60 -C Cable duct Divider 1 pc(s) White
Separating strip PEKE 60-C for KOPOS electrical installation channel EKE 60x60 (Conrad order no.: 1662830), white.This text is machine translated.
KOPOS PK 130X65 D_HD Cable duct (L x W x H) 2 m x 130 mm x 67.5 mm 1 pc(s) White
Intended for the installation of low-voltage cablesSuitable for the laying of power as well as communication circuits, fuse and other linesInstallation of separation pad or shielding possibleSuitable for the installation of device sockets with common...
KOPOS PKS 70/60 XX Cable duct Divider (L x W x H) 2000 x 10 x 45 mm 1 pc(s) Metal
Is used to divide the inside of the channels to a better handling of the imported cable as well as a better overview.Due to the thin metal foil achieves a similar properties to a metal separator, however, it is much easier. Individual separators are the...
KOPOS PKUP_LB Divider (L x W x H) 248 x 6 x 29 mm 1 pc(s)
The separation pad is used to separate the internal room of the KOPOBOX 80 device carrier in case the KPP 80 device socket is not used and the installation is done directly in the PP 80/45 device base.This text is machine translated.
KOPOS PP 80/0_LB Cover (L x W) 250 mm x 89 mm 1 pc(s)
The device plate is installed in the device insert KOPOBOX 80. Installation is recommended together with the KPP 80 appliance cup.This text is machine translated.
KOPOS PP 80/3_LB Device mount (L x W) 250 mm x 89 mm 1 pc(s)
The device plate is installed in the device insert KOPOBOX 80. Installation is recommended together with the KPP 80 appliance cup.This text is machine translated.