Cable junction box with terminal cover for indoor and outdoor use. The screw-less, stuck clamp cover enables a quick and secure installation.This text is machine translated.
12 inserts for cable diameters 8-14 mmThis text is machine translated.
The cable junction box has 8 inserts a cable diameter of 7-14 mm and 8 entries for a cable diameter of 7-11 mmThis text is machine translated.
The cable junction box has 8 inserts a cable diameter of 7-14 mm and 8 entries for a cable diameter of 7-11 mmThis text is machine translated.
The cable junction box has 8 inserts a cable diameter of 7-14 mm and 8 entries for a cable diameter of 7-11 mmThis text is machine translated.
The cable junction box has 10 inserts a cable diameter of 7-14 mm and 8 entries for a cable diameter of 7-11 mmThis text is machine translated.
The cable junction box has 10 inserts a cable diameter of 7-14 mm and 8 entries for a cable diameter of 7-11 mmThis text is machine translated.
B9/T...: consists of two different halogen-free plastic components, 8 threaded inserts (PG 16) With puncture membrane (for cable diameter up to 15 mm) in the floor area. When using the cable glands (additional strain) is a remove of the membrane is not...
The wet room cable junction box consists of two different halogen-free plastic components, 2 additional entry in the floor with puncture membrane (for cable diameters up to 15 mm) with puncture membrane (for cable diameters up to 15 mm). When using the...
B9K...: protection class IP67, empty box to vewendung with single terminals 4 cover screws made of plastic, thus absolutely corrosion safe 2 mounting feet for screws up to 5 mm diameter, 7 breakable entries with thread Pg16 with 3 cable glands made of...
Protection class IP54, rated voltage 660 V, nominal cross-section 2.5 ÷ 4 or 4 mm² in combination with the terminal block 700/6 M has the box the nominal cross-section 4 mm², 2 mounting holes for screws up to 5 mm diameter on the outside of the box....
Protection class IP54, rated voltage 660 V, nominal cross-section 2.5 ÷ 4 or 4 mm² in combination with the terminal block 700/6 M has the box the nominal cross-section 4 mm², 2 mounting holes for screws up to 5 mm diameter on the outside of the box....
Connection box for the jamming of terminals, with lid and cover screw (15 mm), lid margin is plan to surface is roughened, in connection with cover and lid screws reach the junction boxes the VDE mark according to VDE 0606 and are flame-resistant according...
Connection box for the jamming of terminals, with lid and cover screw (15 mm), lid margin is plan to surface is roughened, in connection with cover and lid screws reach the junction boxes the VDE mark according to VDE 0606 and are flame-resistant according...
Connection box for the jamming of terminals, with lid and cover screw (15 mm), lid margin is plan to surface is roughened, in connection with cover and lid screws reach the junction boxes the VDE mark according to VDE 0606 and are flame-resistant according...