Only calibrated meters are approved for electricity accounting according to §25 of the German calibration law. Non-compliance is an administrative offense according to §19. Converter three-phase meter with adjustable converter ratio and MID. Maximum...
Only calibrated meters are approved for electricity accounting according to §25 of the German calibration law. Non-compliance is an administrative offense according to §19. M-Bus converter three-phase meter with adjustable converter ratio and MID. Maximum...
Only calibrated meters are permitted for electricity billing in accordance with paragraph 25 of the German Calibration Act. Non-compliance is an irregularity in accordance with paragraph 19. Mobile alternating current counter with CEE plug 16A and CEE...
Only calibrated meters are permitted for electricity billing in accordance with paragraph 25 of the German Calibration Act. Non-compliance is an irregularity in accordance with paragraph 19. Mobile phase counter with CEE plug 32A and CEE plug 32A. For...
Energy consumption display with display - smart metering for mounting rail. Stand-by loss only 0.5 watts. The energy consumption display measures the active energy like an alternating current meter on the basis of the current flowing between the input...
2-channel timer. 1+1 normally open contact potential-free 16A/250V AC. With Astro function. Stand-by loss only 0.03-0.4 watts. From the production week 26/19 with display lighting. Series installation device for mounting on DIN-EN 60715 TH35 mounting...
2-channel timer with display and Bluetooth. Channel 1 with 1 NO, potential-free 16A/250Vac and DX. Channel 2 with 1 OptoMOS semiconductor output is potential-free 50mA/12..230VUC Z.B. For controlling an electronic relay (ER) or current group switch (EGS)....
Only calibrated meters are approved for electricity accounting according to §25 of the German calibration law. Non-compliance is an administrative offense according to §19. Maximum current 32A, standby loss only 0.4 watts. Series installation device...
Only calibrated meters are approved for electricity accounting according to §25 of the German calibration law. Non-compliance is an administrative offense according to §19. Maximum current 65A, standby loss only 0.4 watts. Series installation device...
Maximum current 32A, standby loss of only 0.5 watts. Series installation device for mounting on DIN-EN 60715 TH35 mounting rail. 1 division unit =18mm wide, 58mm deep. This AC counter with reset function measures the active energy on the basis of the...
Additional technical information: Suitable for: EMAG ultrasonic cleaner; Volume: 0.5 l
Compatible with: EMAG EMMI 20HC; Volume: 2 l
Ultrasonic cleaner accessories
The stainless steel cover with 2 glass beakers (incl. cap and rubber ring) for emmi 40 for gentle cleaning and for convenient into place and removal of small objects, such as springs, nozzles, screws, needles, etc. It can also be worked with different...
With the Ember car charger you can maintain your perfect temperature for even longer. Make sure that your Ember travel cup remains fully charged even on your longest drive or ride, so it is always ready when you are.Smart and elegantThe car adapter is...