Order by: Relevance, Product Rating
Price: Low to High, High to Low
Laser 5390 500ml Evacuation Dispensing Pump
A handy tool for removing fluid from cooling systems or when topping up with antifreeze.
Laser 5442 Tyre Valve Connector Clip On/Open End
An easy to fit brass tyre valve connector with clip on, open type chuck for quick fitting.
Laser 5448 Dial Type Inflator Gauge
A robust tyre pressure gauge with large easy to read dial in kPa and psi (1 BAR = 100kPa)
Laser 5449 Dial Type Tyre Inflator
A robust tyre inflator for the professional garage and workshop with an easy to read gauge for accurate measurements and rubber boot protection.
Laser 5451 - Engine Timing Tool Kit (BMW M62 VANOS Engines)
Manufactured for use with BMW M62 VANOS engines, this timing tool kit is an essential service tool that will also work with Range Rover 4.4 litre engines fitted between 03 & 05 and also M60 engines. This is a comprehensive kit, a must have for engine...
Laser 5469 Triumph/BSA/Norton Motorcycle Fork Tube Puller
This comprehensive set of threaded plugs is for use on many Triumph, BSA and Norton Classic motorcycles and is manufactured for the easy re-install of fork legs after repair work has been carried out. A real time saver.
Laser 5473 72mm GEN2 VAG Wheel Bearing Kit
This wheel bearing kit is an essential service tool for VAG (Volkswagen Audi Group) models fitted with 2nd generation wheel bearings. These second generation bearings can't be separated from the drive flange so this specialist fitting/removing tool...
Laser 5481 3/8" Drive Insulated 5-25Nm Torque Wrench
Fully insulated torque wrench manufactured to EN/EC standards with 5-25Nm torque range, manufactured with hybrid and electric vehicle repairs in mind. A must have for modern electric powered vehicles. Just one of a range of insulated tools available...
Laser 5483 3/8" Drive Insulated Socket Set
This VDE/GS approved, this insulated socket set is manufactured with hybrid and electric vehicles in mind. Complete with 3/8" Drive ratchet, extension bars and a variety of sockets, the entire set is fully insulated for safety and peace of mind....
Laser 5492 TPMS Tool Set
A comprehensive and essential kit for servicing tyre pressure monitoring systems fitted to a wide range of cars and other vehicles. This set is a must have for any automotive workshop.
Laser 5495 Valve Spring Compressor
This engine valve spring removal kit, can be used with the cylinder head in place if compressed air is used to keep the valves shut. Suitable for use with a wide range of engines from various manufacturers.
Laser 5502 Brake Drum Wear Gauge
A simple to use tool used to measure the wear limit on brake drums as well as to measure the diameter of the drum and then set the shoe position prior to drum re-fitting. Suitable for use with a range of models from various manufacturers.
Laser 5520 1/2" Drive Torque Wrench 80-400Nm
A torque wrench supplied with a test certificate packed in a blow case. This model ranges from 80-400Nm 60-300Ftlbs with plus or minus 4% accuracy and has a length of 680mm.
Laser 5521 12 Piece Stubby Star Bit Set
A handy set of 12 stubby star bit sets, suitable for a wide range of applications, especially those in hard to access areas. Manufactured from durable chrome vanadium and S2 material.
Laser 5522 10 Stubby Hex Bit Set
A handy set of 10 stubby hex bit sets, suitable for a wide range of applications, especially those in hard to access areas. Manufactured from durable chrome vanadium and S2 material.