Order by: Relevance, Product Rating
Price: Low to High, High to Low
Laser 6293 Knuckle Ball Joint Separator - Land Rover/ Range Rover
This kit is designed to allow top and bottom steering ball joints fitted to the Land Rover and Range Rover models listed below to be replaced with the axle casing attached to the vehicle. This kit is can be used with: Application: Land Rover Discovery...
Laser 6298 Ignition Coil Puller Tool - VAG
Up to 40,000 miles the coil packs don’t want to budge in VW/Audi petrol cars. They sit deep down between the camshafts, access is difficult, and the tight fitting rubber boot will not easily come apart from the spark plug. The answer is this ignition...
Laser 6301 Crankshaft Holding Tool - BMW
The Laser 6301 is a BMW timing tool for use with BMW N47 and N57 1.6/2.0/3.0 diesel engines. This handy tool is completed with a reliable manufacture in Sheffield.
Laser 6318 Oil Filter Chain Wrench - HGV
This new oil filter wrench from Laser Tools features a classic chain design, and is for use with HGVs and is extra strong, featuring a chain length of 520mm. It will fit canister-type filters of diameters 60-160mm, and the 350mm long handle has a cranked...
Laser 6323 Air Bag Test Resistor Set
This tool is used to assist in the diagnosis of an airbag light being constantly on. This set can assist in the diagnosis of a failed air bag unit, failed airbag clock spring, seat-belt pre-tensioners ect. Simply connect in place of the air bag unit to...
Laser 6325 Engine Timing Tool Kit - GM/Saab 2L Turbo
The Laser 6325 is part of the range of engine timing tools for GM/SAAB models. This unit works with the following vehicles: Vauxhall/Opel Signum Turbo 2003-2008, Vectra-C Turbo 2002-2008 Saab 9-3 1.8T 2002-2011, 9-3 1.8T BioPower 2002-2011, 9-3 2.0t...
Laser 6328 Air Dryer Cover Remover 104 - 150mm
The Laser 6328 is designed to remove air brake filters from commercial vehicles which can be extremely tight and difficult to remove without the correct tool. This unit has a size range of 104 - 150mm with a leg length of 64mm. This tool is also spring...
Laser 6329 4 Piece Brake Caliper Re-wind Tool
This brake rewind tool from Laser features an adjustable adaptor which will fit pistons with a pin distance between 20 - 35 millimetres, meaning it can cover many popular vehicle applications. The advantage of this rewind tool is that it features a powerful...
Laser 6332 1/2'' Drive Crankshaft Rotator - MAN
The Laser 6332 is a 1/2'' drive crankshaft rotator for use with Man Atego/Vario HGV vehicles. This unit benefits from a phosphate finish and S45C steel manufacture for added reliability.
Laser 6347 Prop Shaft Bearing Nut Socket - DAF
The Laser 6347 prop shaft bearing nut socket is manufactured from chrome molybdenum for reliability and features a 3/4'' drive.
Laser 6348 Engine Timing Tool Kit - VAG 1.2 - 1.4 TSI
The Laser 6348 is an engine timing tool kit for use with 1.2/1.4TSI four cylinder, petrol engines. This tool is compatible with the following car models: Audi A1, A3, Q3, Volkswagen Golf VII, Passat, SV, Sportsvan, Polo, Jetta, Seat, Leon, Leon ST,...
Laser 6349 Fork Cap Socket - Ducati 1200 Multistrada
The Laser 6349 is designed for use with all Ducati multistrada models fitted with Sachs type forks. This tool can be driven by a 1/2"drive ratchet or a 27mm ring spanner and is completed with a robust design and manufacture.
Laser 6350 Stretch Belt Fitting Tool BMW N52
This stretch belt fitting tool is for use on BMW vehicles fitted with the N52K 3.0L petrol engine for instances where a separate stretch belt is used to drive the air conditioning pump.
Laser 6355 Front Lower Arm Bush Tool - Land Rover
The Laser 6355 is used for the removal and refit of the front suspension bush with minimum dismantling. This unit is designed to be used with the Discovery 3 & 4 (2004 on), Range Rover Sport (2005 on) and is completed with a robust build, making it...
Laser 6356 55mm/30mm Wheel Impact Socket Ducati
The Laser 6356 is designed to be used with an impact gun to remove both rear and front fixings that have been over tightened or partially seized. This tool is designed to be used with Ducati Super Bike 1098, 1198, 1199, Panigale, Street fighter 1098,...