Order by: Relevance, Product Rating
Price: Low to High, High to Low
Laser 8149 3 Piece Power Extensions with Wobble Function
A set of 3 power extensions with wobble function for driving 1/4", 3/8" and 1/2" Drive sockets with quick chuck facility. Integral wobble function provides up to 30° angle swivel, allowing easier access to hard to reach fasteners.
Laser 8160 LTR Chain Checker
This chain wear indicator gauge should be used periodically to measure how much a chain has worn and stretched, ensuring it can then be replaced before it has caused any additional wear to the components that it runs on. A worn chain can be noisy, cause...
Laser 8161 LTR Large Pedal Spanner 15mm
A 15mm pedal wrench, with super slim profile and long handle, for removing pedals on most modern bicycles. It's slim enough to fit comfortably between the pedal body and crank arm, minimising marking or damage to the pedal arm. The long handle, with comfort...
Laser 8162 LTR Brake Rotor Truing & Piston Press Tool
Disc brake tool combining two different functions to ensure that brake rotors can run freely and quietly through the caliper. At one end is a rotor truing fork, with two different length slots allowing for different degrees of leverage to be applied to...
Laser 8163 LTR Pedal Spanner & Chain Whip
Combines a 15mm pedal wrench for removing the pedals on the majority of most modern bicycles, 16mm box spanner, and a chain whip for use when removing and installing sprockets/cassettes. Also known as a sprocket remover, the chain whip holds the cogs...
Laser 8164 LTR 3 piece Tyre Lever Set
Set of 3 compact tyre levers, ideal for road and trail side repairs, as well as general workshop use. The narrow profile makes them easy to slide in and hook underneath the tyre. The spoke hook end allows the levers to hold themselves in place when more...
Laser 8165 LTR Hub Cone Spanner Set 8pc
Typically 5mm thinner than a regular spanner, cone nut spanners slide between the hub and the axle locking nut, onto the cone nut to allow for the hub bearings to be correctly adjusted. This set of cone nut spanners is ideal for use by both the home or...
Laser 8166 LTR Alloy Folding Tool Kit
Folding tool kit including a range of essential tools to carry out most road and trail side repairs. The ultra slim size of this alloy multi-tool means that it will easily fit into any saddle bag, back pack, or pocket
Laser 8167 LTR Headset Cup Removal Tool
This headset cup removal tool allows for the quick, easy and safe removing of bearing cups from a bicycle frame. It is designed to slide through the frame until the sprung end engages onto the top of the cup allowing for a simple hammer blow to remove...
Laser 8168 LTR Bottom Bracket Installation Tool
Allows for the quick and easy installation of press fit bottom brackets without risking damage to the frame. The stepped plates clamp either side of the axle allowing the force screw to be turned, pressing the bearing cups into the bottom bracket shell....
Laser 8169 LTR Hollowtech II Bottom Bracket Tool
Used to install or remove bearing bottom brackets on the majority of bikes fitted with 16-notch external bearing threaded cups. The splines engage securely onto the bottom bracket notches allowing for easy removal or tightening of the cups, without the...
Laser 8170 LTR Chainring Nut Tool
Designed to access the narrow spaces behind the chainset, this low profile chainring nut spanner holds the nut still to prevent it from turning when tightening or loosening the chainring bolt using a Hex or Star key.
Laser 8171 LTR 2 piece Hub Cone Spanner Set
Badly adjusted or loose cone nuts can cause unnecessary wear and damage to both the wheel bearings and inner hub components. These super slim cone spanners allow for the cone nuts to be tightened hard up against the axle lock nuts so that they don't then...
Laser 8172 LTR Chain Whip
For use when removing and installing sprockets and cassettes. A chain whip, also known as a sprocket remover or a sprocket holder, is used to hold the cogs on the rear wheel in place as a lockring tool is used to undo the cassette in the opposite direction.
Laser 8173 LTR Crank Removal Tool
This crank extractor is used for the correct removal of crank arms and chainsets that use a square-tapered, or splined ISIS Drive, bottom bracket. The threaded collar screws into the crank arm before the drive bolt gently forces the bottom bracket axle...