This Laser 8295 Impact Socket Bit Set is engineered for specific use on the brake calipers of German cars. Bits are 100mm long and are impact quality. The M14 Spline socket bit, is part of a larger set, Laser part no. LAS8237.
This set of wheel locating guide pins has been designed to aid with the refitting of wheels on to cars and vans. It contains 7 pairs of threaded locating pins which can be screwed into the wheel hub in place of the wheel bolt or nut, this then allows...
This adas (advanced driver assistance systems) angle setting tool has been designed to ensure the correct position of the front facing radar sensor on Volvo XC60, S80, S60, V70, and V60 models as part of the calibration process.
Designed to allow damage-free fitting of the rear main crankshaft oil seal on the JLR 2.0L diesel “Ingenium” engine. When performing major engine rebuild work on any engine it is easy to damage the rear main seal if it is not aligned and guided into...
This 3-piece spring-loaded universal joint set, comprising of 1/4", 3/8" & 1/2" drive joints, has been designed to make them easier to fit on to sockets and offer up to fasteners. Their low profile design allows them to be used in confined spaces,...
2-In-1 drain plug wrench specifically designed for use on BMW and Mercedes-Benz vehicles. It features a cranked 14mm hex key at one end, to fit transmission and differential housing drain plugs, with a single hex 17mm ring spanner at the other end to...
An oil funnel set complete with a 2 piece funnel and 3 adaptor caps sized to fit various vehicles from the Volkswagen Audi Group. The assembled funnel is connected directly to the oil filler neck using the correct adaptor for the vehicle. This forms...
An oil funnel set complete with 2 special adaptor caps to fit various vehicles from Nissan and Renault. Once assembled, the funnel is connected directly to the oil filler neck using the correct adaptor for the vehicle. The funnel forms a tight seal,...
Bench mounted digital torque tester suitable for testing any torque wrenches and screwdrivers with a range within 1.5-30Nm, ideal for ensuring repeat accuracy and compliance with industry standards. It is mains powered, features a 4 digit easy to read...
Bench mounted digital torque tester suitable for testing any torque wrenches and screwdrivers with a range within 25-500Nm, ideal for ensuring repeat accuracy and compliance with industry standards. It is mains powered, features a 4 digit easy to read...
Bench mounted digital torque tester suitable for testing any torque wrenches and screwdrivers with a range within 100-2000Nm, ideal for ensuring repeat accuracy and compliance with industry standards. It is mains powered, features a 4 digit easy to read...
A pair of specially shaped air hammer punches specifically designed to easily release and stake crush type axle nuts commonly found on both 2 and 4 wheel drive vehicles, reducing the chance of causing damage to axle shaft and threads. The kit includes...
Valve core bit driver set ideal for use during the maintenance and repair of vehicle air conditioning (AC) systems. Designed to easily remove standard R12, PSA and Volvo M10 and R13 valve cores during refrigerant replacement, when using leak detection...
This combined timing pin and auxiliary belt fitting set has been designed to be used to lock the crankshaft, camshaft and high pressure fuel pump pulleys on the Ford and PSA 1.4, 1.5 And 1.6L common rail diesel engines found across the Ford, Citroën,...
Set of 4 general purpose wire brushes suitable for a wide range of applications including rust and corrosion removal, together with cleaning off loose paint and debris prior to welding or attaching electrical connections. These feature a heavy duty wooden...