Order by: Relevance, Product Rating
Price: Low to High, High to Low
Power-Tec - Pneumatic Paint Mixer
Simple and easy to use, this clever air powered paint mixing system can be used with small compressors to mix standard size paint cans up to 5 litre capacity. Suitable for body shops, garages and workshops, simply load the can, attach an air line, switch...
Power-Tec - Polly Trolley
This easy to use 'Polly Trolley' from Power-Tec is manufactured for the easy storing and dispensing of polythene sheeting used in the workshop. It can be easily transported around the workshop thanks to the large rugged wheels and then protective...
Power-Tec - Power Pot
For general bodywork and chassis pulling applications, the power pot is installed directly into the workshop floor, allowing for full 360 degree pulling, providing better accessibility and versatility.
Power-Tec Pry & Surface Spoon
This Pry & Surface Spoon is made from top quality forged steel, heat treated under controlled conditions, ground and polished to a high standard.
Power-Tec - Pull Hook Set
Ideal for a multitude of pulling tasks in the automotive bodywork repair industry, this pull hook set from Power-Tec has 300mm reach, 150mm depth and comes complete with small and large pull plates and also an adaptor for the 10 ton body kit. A real time...
Power-Tec - Pulling Yoke
Simple to use, this pulling yoke is ideal for use with pulling straps or chains and is great for various automotive bodywork pulling applications. Simply slip the pin into the back of the clamp and set up the pull. Can be used with a pulling clamp or...
Power-Tec - PullRite Panel Puller
Easy to use, the Power-Tec PullRite is a clever piece of kit, designed to be used with squiggly wire to rough out panel damage. The PullRite simply hooks onto the squiggly wire after it has been welded to a panel, allowing for a firm, gentle pull to remove...
Power-Tec - Red Marking Pen
This fantastic marking pen writes on almost anything, making it ideal for various applications, anywhere, anytime. Able to write on even wet surfaces, this pen features a built in sharpener and is in a distinctive red colour.
Power-Tec Ring Dolly
This Ring Dolly is made from top quality forged steel, heat treated under controlled conditions, ground and polished to a high standard.
Power-Tec Rubber Heel Dolly
This Rubber Heel Dolly is weighted so it can be used to help shape metal without damaging the surface.
Power-Tec - Safety Cable
A must have in the automotive bodywork repair industry, especialy during bodywork pulling applications, this durable steel wire safety cable should be attached to both the pulling clamp and vehicle during pulling work, to avoid potentially expensive and...
Power-Tec - Sanding Block
A 70mm x 125mm hook and loop backed sanding block. Ergonomically design for ease of use, suitable for a wide range of sanding applications.
Power-Tec - Scissor Clamp
A 50mm wide Scissor Clamp from Power-Tec with 3 ton pulling capacity. Suitable for a wide range of pulling applications.
Power-Tec - Seam Splitter
Sharpened on two edges, this steel alloy splitter is manufactured to allow for impact to drive body panels apart without damaging them, allowing for an easier to complete and less expensive bodywork repair. Releases body panels quickly, easily and importantly,...