Order by: Relevance, Product Rating
Price: Low to High, High to Low
Trend 337X1/2TC Tongue & Groove Set
A one piece bearing guided set. Parts are inter-changed on the arbor to alter the set-up. D 41 mm C 6.35 mm C2 10 mm E 22 mm OL 76 mm Shank Diameter 1/2 inch Timber thickness min. 15 mm Timber thickness max. 22 mm
Trend 34/20TC Slotter
All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. D 41.3 mm Kerf 6.0 mm No. of Teeth 2
Trend 342X1/2TC Professional Biscuit Jointer Set
For biscuit jointing of timber, man-made fibre and particle board with the router. D 40 mm C 4 mm B 15 mm B2 19 mm B3 23 mm Shank Diameter 1/2 inch
Trend 346x1/2TC Intumescent Strip Cutter 1/2" Shank
Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. D 40 mm C 10 mm B 32 mm E 4 mm L 41 mm
Trend 3/51X1/2TC 9.5 x 32mm Two Flute Straight Cutter
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. D 3/8 inch D 9.5 mm C 32 mm OL 76...
Trend 3/6X1/4TC 10 x 19mm Two Flute Straight Cutter
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. D 25/64 inch D 10 mm C 19 mm OL 51 mm
Trend 3/83X1/2TC 12.7mm Two Flute Professional Router Cutter
A two fluted cutter to give a clean finish to the cut edges. Use only on professional routers with 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutter retraction into base. D 1/2 inch D 12.7 mm C 50 mm OL 108 mm Shank...
Trend 3/8LX1/4TC 12 x 19mm Two Flute Straight Cutter
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Suitable for Trend Hinge & Lock Jigs. D 15/32 inch...
Trend 3/8X1/4TC 12 x 19mm Two Flute Straight Cutter
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. D 15/32 inch D 12 mm C 19 mm OL 51...
TREND 400mm Router Surfacing Jig
Adaptable compact jig for flattening, surfacing and trenching work on wide or irregular shaped material. The cradle can be fixed for trenching work, and the 4 rails provide a large area of coverage, especially when paired together to double the potential....
Trend 4/04X1/2TC 15 x 35mm Two Flute Straight Cutter
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. D 15 mm C 35 mm OL 76 mm
Trend 4/1X1/4TC 15 x 25mm Two Flute Straight Cutter
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. D 19/32 inch D 15 mm C 25 mm OL 57 mm
Trend 4/29X1/2TC 18 x 25mm Two Flute Straight Cutter
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. D 45/64 inch D 18 mm C 25 mm OL 67 mm
Trend 4/2X1/2TC 16 x 19mm Two Flute Straight Cutter
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. D 5/8 inch D 16 mm C 19 mm OL 60 mm