Thin-walled, flexible heat-shrink tubing. Flame retardant. Very low shrink temperature. Very good mechanical strength. Good chemical resistance Large color and size selection of the TF31 is used where increased requirements are placed on fire protection....
Transparent, highly flexible heat-shrink tubing TF34. Protects labels optimally. Good mechanical and chemical resistance. Halogen-free of the transparent heat-shrink hose TF34 is used if the shrink-wrapped component is to remain visible. The main application...
Transparent, non-combustible heat shrink tubing TFE. Very thin-walled and resistant. Shrink rates 2:1 and 4:1. For operating temperatures up to +260° C. Very good mechanical strength. Very good chemical resistance PTFE shrink tubing offers excellent...
Transparent, non-combustible heat shrink tubing TFE. Very thin-walled and resistant. Shrink rates 2:1 and 4:1. For operating temperatures up to +260° C. Very good mechanical strength. Very good chemical resistance PTFE shrink tubing offers excellent...
Transparent, non-combustible heat shrink tubing TFE. Very thin-walled and resistant. Shrink rates 2:1 and 4:1. For operating temperatures up to +260° C. Very good mechanical strength. Very good chemical resistance PTFE shrink tubing offers excellent...
Good flow properties of the adhesive. Excellent protection against moisture and corrosion. Due to the high shrink rate, the hose fits easily high diameter differences at EPS-400 is optimal for mechanical relief and for protecting plugs and junctions,...
Good flow properties of the adhesive. Excellent protection against moisture and corrosion. Due to the high shrink rate, the hose fits easily high diameter differences at EPS-400 is optimal for mechanical relief and for protecting plugs and junctions,...
Good dielectric strength and good chemical and mechanical resistance LVR is used in the installation of cables and wires. Bus bars, shafts and batteries are securely insulated and protectedThis text is machine translated.
Good dielectric strength and good chemical and mechanical resistance LVR is used in the installation of cables and wires. Bus bars, shafts and batteries are securely insulated and protectedThis text is machine translated.
For use in conjunction with heat-shrinkable molded parts and hoses. Heat-shrinkable products with inner adhesive are used for optimum protection against moisture during assembly or repair. However, if only occasionally shrink products with inner adhesive...
The hot melt tape flows when heated and provides permanent air and water tight seals. Designed for use with heat shrink sleeving and mouldings.
The light and stable HIS-Service Station offers place for 5 HIS-boxes for clean preservation at the work place or for mounting at the wall. The special shears simplify the trimming. HIS Universal shrink hoses insulate reliably and protect against corrosion...
The small and handy set offers heat-shrink tubing sections with the favourable shrink ratio of 3:1. The entire range of application from 1 to 16 mm is covered.
Thanks to the numerous sizes, colours and lengths, these heat-shrink tubing sections can be used as insulation, as kink protection or for colour coding. The range of applications from 1 to 20 mm is covered.
The set contains black and transparent sections with hot-melting inner adhesive. The applications range from securely sealing off cable connections to corrosion protection for components to long-lasting protection of labelling (transparent tubing). The...