Order by: Relevance, Product Rating
Price: Low to High, High to Low
H-Tronic Block and signal module Colour control Prefab component
This component combines connection of signals with the pertinent retaining sections. The status indication is provided with the LEDs on the component Thus, this component can be attached and controlled optimally below the system The track connection does...
H-Tronic Continuous lighting/tail lights Suitable for: AC and DC 1 pc(s)
Who does not know the disturbing flicker of the tail lights when driving over the section points, switch transitions or termination while stationary? Moreover, the brightness is dependent on the driving voltage with conventional track lighting New long...
H-Tronic Power module Component Input voltage (range): 230 V AC (max.) Output voltage (range): 5 - 24 V DC 1.5 A
Input voltage (max.): 230 V AC; Input voltage range: 230 V AC; Output current: 1.5 A; Output current (details): 1.5 A; Output voltage (details): 5/9/12/15/18/24 V DC; Output voltage (max.): 24 V DC; Output voltage (min.): 5 V DC; Product size (length):...
H-Tronic PSU Assembly kit Input voltage (range): 30 V AC (max.) Output voltage (range): 1 - 30 V DC 3 A
A high-performance, reliable laboratory power supply can be built with the power supply circuit. Because of the wide-ranging adjustability of voltage and current this circuit can also be used in a demanding laboratory environment. The adjustments to current...
H-Tronic PSU card Component Input voltage (range): 5 - 26 V AC Output voltage (range): 1.35 - 30 V DC 1.0 A
6 fixed voltages can be measured by means of plug-in jumpers and can be alternatively adjusted via a potentiometer with output voltage from 1.25 to 30 V/DC Only a transformer with an output voltage of more than approximately 3 V/AC is required as the...
H-Tronic PSU Component Input voltage (range): 30 V AC (max.) Output voltage (range): 1 - 30 V DC 3 A
A high-performance, reliable laboratory power supply can be built with the power supply circuit. Because of the wide-ranging adjustability of voltage and current this circuit can also be used in a demanding laboratory environment. The adjustments to current...
H-Tronic Shuttle train auto controller Prefab component for Z to I scale DC trains
An automatic shuttle mode on a secondary line livens up each model railway system. If the train reaches its stopping area, it is sent back on the track in the opposite direction after the set waiting time has elapsed. If the train travels in the isolating...
H-Tronic Single button point control Assembly kit
With this controller, you can switch the points and any two coil relay with a single button or a reed switch. Since the switching pulse is limited in duration, magnetic drives can be used with and without end stop. The drives capture a specific basic...
H-Tronic TDR Component 12 V DC 0.1 s - 63 h
8 different functions can be set with this time relay. The functions and the time ranges are selected by means of a dip-switch.. Six LEDs show the different operating states. This circuit implements 8 different functions: Switch-on delay with reset ·...
H-Tronic Train stop switch Assembly kit
Automate your model railways operation in many areas This kit contains a start-up and a brake mechanism as well as an electronic time adjustment Gentle braking in the fixed block distance, acceleration after adjusted time interval. Electronic current...
H-Tronic Universal switch Prefab component
The component is intended for switching on, switching off or change-over of light or rail circuits. It is controlled by switches, switch contacts, potential-free reed contacts or switching tracks and can be operated for all model trains which uses DC,...
H-Tronic Voltage transformer Component Input voltage (range): 4, 4 - 24, 24 V DC, V AC Output voltage (range): 1.2 - 20 V DC 500 mA
Delivers an adjustable output voltage between 1.2 and 20 V/DC from an input voltage of 4 - 24 V/AC/DC. Supplies kits, units and other devices.
HyCell HR03 1000 AAA battery (rechargeable) NiMH 800 mAh 1.2 V 4 pc(s)
Particularly suitable for electrical devices such as digital cameras, MP3 and video players, electronic toys, etc. The high capacity and an extremely high current performance ensure long operating times. The batteries can be recharged about 1000 times....
HyCell HR06 2700 AA battery (rechargeable) NiMH 2400 mAh 1.2 V 4 pc(s)
Particularly suitable for electrical devices such as digital cameras, MP3 and video players, electronic toys, etc. The high capacity and an extremely high current performance ensure long operating times. The batteries can be recharged about 1000 times....
Igarashi 20GN152025-330-GC150:1 Gearmotor 12 V 150:1
RoHS compliant; ; This text is machine translated.