Especially old Maerklin switches (with double coil drive) are already in need of even a strong "extra blow” to divert a bit. This helps the switching amplifier. The power is stored in a capacitor, then fed through transistors on a beat and with a higher...
Emergency vehicles with blue light and siren, buses with warning lights on at the bus stop, lorries with beam on the country road - these are the real eye catchers at the Miniatur-Wunderland in Hamburg. Trying to convert vehicles for the Faller car system...
Through the opening of the circuit-fitting, short signal is triggered,to give a signal at the output, which remains for 1-100 seconds. The time span is adjustable by controller The relay outputs can be controlled directly.
Duo-LED are ideal as a front-end or lighting of locomotives and wagons. However, they only have a common cathode (-) and therefore can not be directly connected to the functional outputs of locomotive and Function decoder. Using an intermediary function...
Areas of applicationSuitable for operation with the digital central RedBox and master control. With the hand-control 2, the system parameters for the control easy digital control, and the decoder data in the locomotive database of the central unit can...
Practical plastic holder for hand-held control device hand control 2. With 3 holes for mounting on vertical surfaces.This text is machine translated.
Flexible for the connection of digital control devices Diverser manufacturer. Driving fun guaranteed for one or more model railway fans!Universal for DCC (14, 28, 128 driving positions), DCC-A, RailCom, mm, mm2, m3, s88-N, X-Net, L-Net, BiDiB, can100%...
Flexible for the connection of digital control devices Diverser manufacturer. Driving fun guaranteed for one or more model railway fans!Universal for DCC (14, 28, 128 driving positions), DCC-A, RailCom, mm, mm2, m3, s88-N, X-Net, L-Net, BiDiB, can100%...
Flexible for the connection of digital control devices Diverser manufacturer. Driving fun guaranteed for one or more model railway fans!Universal for DCC (14, 28, 128 driving positions), DCC-A, RailCom, mm, mm2, m3, s88-N, X-Net, L-Net, BiDiB, can100%...
DCC-conforming booster interface (3-pin / "CDE") for connection to the DCC-conforming booster interface of a central unit or the track output of a central unit. Regulated Multi-protocol booster for use with MM, DCC or Central-mfx. For systems with feedback...
DCC-conforming booster interface (3-pin / "CDE") for connection to the DCC-conforming booster interface of a central unit or the track output of a central unit. Regulated Multi-protocol booster for use with MM, DCC or Central-mfx. For systems with feedback...
The power splitter splits the output current of the booster into two or three sections with a maximum current of either 2 or 3 A. It thus enables the utilization of the available booster current even at smaller nominal sizes. Since it only monitors the...
The power splitter splits the output current of the booster into two or three sections with a maximum current of either 2 or 3 A. It thus enables the utilization of the available booster current even at smaller nominal sizes. Since it only monitors the...
Small Locomotive decoder for trace N, TT and H0.This text is machine translated.
Small Locomotive decoder for trace N, TT and H0.This text is machine translated.