Order by: Relevance, Product Rating
Price: Low to High, High to Low
Viessmann Modelltechnik 5056 Tail lights + LEDs 2 pc(s)
For illuminating tail lights on rail vehicles. Intended for connection to the Viessmann wagon interior lighting (BN 1380572, 1380575 and 1380576). A resistor (6k8) and a diode are included to operate the rear train lighting directly at the track voltage...
Viessmann Modelltechnik 5057 H0 Saltires + flashing lights Assembled
This set consists of 4 light signal systems each with a red and a yellow LED and St. Andrew's cross as well as control electronics. The light signals show yellow for approx. 2 seconds, then red and yellow light goes out. Red lights up until the train...
Viessmann Modelltechnik 5058 H0 2-piece set Saltires Assembled
2pc set; Inclusive of coloured adhesive labels and LEDs
Viessmann Modelltechnik 5061 H0 Light Stop signal Assembled DB
For railway crossings with flashing light. With filigree brass mast in originalgetreuer paint and patent plug base for easy installation. For connection to the flashing device Art. 5065. With 2 LEDs, maintenance-free. Bue101 signal image. Height: 5...
Viessmann Modelltechnik 5084 H0 DB automatic ticket machine with LED lighting Assembled
Draw a train ticket before departure! With high-quality tampon printing.This text is machine translated.
Viessmann Modelltechnik 5087 LED strip Town lighting + leads 1 pc(s)
These LED light strips are suitable for stationary lighting. They are made of flexible material and are coated with adhesive tape on the back. This makes it easy to install and even lay it in a curved way. The LED strips are intended for operation on...
Viessmann Modelltechnik 5089 LED strip Town lighting + leads 1 pc(s)
These LED light strips are suitable for stationary lighting. They are made of flexible material and are coated with adhesive tape on the back. This makes it easy to install and even lay it in a curved way. The LED strips are intended for operation on...
Viessmann Modelltechnik 5094 H0 Pedestrian crossings Assembled
Epic III-VI traffic lights. These sets consist of 2 traffic lights each with a red, yellow and green LED for traffic and one red and one green LED each for pedestrians. They are used to secure pedestrian crossings such as Zebra crossing. True-to-size...
Viessmann Modelltechnik 5095 H0 2-piece set Traffic light + pedestrian crossing Prefab component
This set consists of 2 traffic lights, each with a red, yellow and green LED for the traffic and a red and green LED for the pedestrians. It is used for securing pedestrian over because of such as Zebra crossing. This text is machine translated.
Viessmann Modelltechnik 5096 H0 Pedestrian crossings Assembled
Pedestrian crossings in the style of Eras III-VI. This set consists of 4 pedestrian crossings, each with a red and green LED. They are used for hardening pedestrian over because at intersections. Prototypical Brass mast with patent plug in foot for an...
Viessmann Modelltechnik 5097 H0 Road portal Assembly kit
A piece of Vollmer Steinkunststraße is enclosed with the tunnel. Length 18 cm. The tunnel portal is made of Vollmer stone art. Dimensions: 16.7 x 9.7 x 2.2 cm.This text is machine translated.
Viessmann Modelltechnik 5098 H0 Road portal Assembly kit
A piece of Vollmer Steinkunststraße is enclosed with the tunnel. Length 18 cm. The tunnel portal is made of Vollmer stone art. Dimensions: 12 x 7.6 x 4.5 cm.This text is machine translated.
Viessmann Modelltechnik 5100 H0 Rail barrier
Level crossing with 2 level barriers, driven by 2 separate below ground compact drives. The barriers are characterized by slow opening and closing of the barrier trees. Track pieces, loading ramps as well as printed traffic signs are included. Can be...
Viessmann Modelltechnik 5107 H0 Railway crossing Assembled
Level crossing with two underground-driven level barriers, each with filigree hangworks as well as a bell dummy. The drives enable slow opening and closing of the barriers true to the original. Track pieces, loading ramps as well as printed traffic signs...
Viessmann Modelltechnik 5108 H0 Railway crossing Assembly kit
Level crossing with 2 level barriers, driven by 2 separate underground drives. The drives enable a slow opening and closing of the barriers with 2 speeds true to the original. The road can lead over any number of tracks. Track pieces, loading ramps as...