Silver steel, for building drives, can be used as an axle or for similar purposes. Suitable shaft retaining rings can be found on the Internet.This text is machine translated.
Silver steel, for building drives, can be used as an axle or for similar purposes. Suitable shaft retaining rings can be found on the Internet.This text is machine translated.
Silver steel, for building drives, can be used as an axle or for similar purposes. Suitable shaft retaining rings can be found on the Internet.This text is machine translated.
Silver steel, for building drives, can be used as an axle or for similar purposes. Suitable shaft retaining rings can be found on the Internet.This text is machine translated.
Sinus Live ISS insulating heat-shrink sleeves 20 cm long, red and black sorted.This text is machine translated.
Hardly bigger than a postage mark, this much space is for the switches in each model . You also have the possibility of switching these special functions in small models, such as headlights, turn signals or horn. It is connected to an open channel or...
The 27:1 or 9:1 drive was especially designed for Mabuchi’s RF300CA solar motor. A pleasant rotation speed of about 16 rpm can be reached at 0.5 V and the 27:1 ratio. Ideal for all models that are supposed to rotate slowly.
Motor with metal gear for 2 - 18 Volt operation, also suitable for railway transformer (direct voltage)! For turning, lifting, lowering and all other movements where a lot of force is required. Extremely durable and durable thanks to metal gears!This...
Actuation power 4.8 V = 0.15 kg / cm / 6 V = 0.18 kg / cm · Speed: 0.5 s/cm.
Ready-to-use and steering with ball bearing for 1:87 lorry models, for RC or wire-based models.In the event of wire-guided models and RC-vehicles through the use of ball bearings in the steering with the same battery a considerably longer travel time...
With this 7-part solar starter kit can be easily a great 11 cm high table fan can be built. The 4V solar cell provides enough power to generate considerable air movement despite the small size. The model works in direct sunlight and bright halogen lamp...
Now you can operate this popular wind turbine directly to the power of your model train transformer. · Based on the "REpower MD70" this detailed model is delivered with gear motor. With a rotor speed of approx. 20 U/m, the model is very realistic. Hub...
LED design 0402 fully soldered with paint wire.This text is machine translated.
LED design 0402 with cable fully soldered.This text is machine translated.
LED design 0402 with cable fully soldered.This text is machine translated.