LED design 0402 with cable fully soldered.This text is machine translated.
LED design 0402 with cable fully soldered.This text is machine translated.
LED design 0402 with cable fully soldered.This text is machine translated.
This small motor is perfectly suitable for model railways. Last but not the least by its operating voltage of 12 V, make it both the led-through shaft ends ideal for use as a spare motor the model railway locomotives or as a drive for your own tracks....
Size 0201 LED with soldered copper paint wire. Series resistor (0402) for voltage range 3.7-4.8 V.This text is machine translated.
Size 0201 LED with soldered copper paint wire. Series resistor (0402) for voltage range 3.7-4.8 V.This text is machine translated.
Size 0201 LED with soldered copper paint wire. Series resistor (0402) for voltage range 3.7-4.8 V.This text is machine translated.
Size 0201 LED with soldered copper paint wire. Series resistor (0402) for voltage range 3.7-4.8 V.This text is machine translated.
Double USB LiPo charging board, 20 - 1000 mAh, for charging 2 batteries at the same time. The board is powered by e.g. a power bank or a USB charger. The dual LiPo charging board has been specially developed for charging 1 or 2 lithium polymer batteries...
This small motor is perfectly suitable even for larger model railways. With a maximum output of almost 2 Watt should also the larger track widths in flywheel. But even if in other lines of force is needed, this solid motor.This text is machine translated.
A great kit, the educationally simply the generator principle explained and its function in the form of experiments very clearly displayed. After the construction of the generator and LED-unit, these with the supplied alligator clamp cables connected...
EMG - adjustable motor and speed controller for, car system vehicles and DC motorsThe EMG is an adjustable supply voltage for small DC motors or similar. With this board, the speed of wired vehicles (car system vehicles) can be adjusted, for example....
ERMIKRO- one of the smallest speed controllers in the world!The only 8.45 x 5.5 mm small speed controller can control motors with up to 800 mA bi-directional (forwards/backwards).This makes it ideal for use in small and small functional models such as...
Components of this wooden kit can be used to build a great elevator. Thanks to a battery-operated lifting and lowering function, the lift cab can be moved up and down again. This is made possible with the motor in the set. The batteries (2x AAA) are not...
With the components of this kit a great, pneumatically driven gripping arm can be constructed. Thanks to the pneumatically controlled grip function, the grip arm can move its jaws forward and backward, as well as bring them together and apart.The gripping...